The above gear boxes can be mounted in any mounting position as shown in Table 1. In Agitator Mounting, we provide special bearings on the output shaft which can take axial thrust. This type of mounting is required for the Agitator Drives, only when the Agitator shaft is hanging on the output shaft of the gear box. Normally, for most of the agitator vessels, there is a separate bearing housing with taper roller or axial thrust bearings. In such cases, it is not necessary to use agitator mounting and a standard flange mounted gear box can be used for such applications.

                                                      Table For Thermal Ratings & Possible Hollow Input Frame Sizes
Thermal Rating given below is for input speed of 1500 RPM. For input speeds other than 1500 RPM, contact us. Frame Sizes other than those given in the following table can also be given by making special combinations of stages. For such requirements, contact us.